VEAG Power Plant at Jänschwalde |
Power plant description |
Power plant output | 3.000 (6*500) MW |
Flue gas volume - wet | 12 * 106 Nm3 / h |
Max. SO2 - load in raw gas | 7.700 mg/m3 (dry), 6% O2 |
Max. SO2 - load in clean gas | 200 mg/m3 (dry), 6% O2 |
Limestone consumption | 180 t/h |
Gipsum quantity | 290 t/h, 10 % residual moisture |
Major plant parts | |
12 FGD trains | |
Absorber dimensions (diameter/height) | 16,5 / 45,35 m |
Material | high - quality stainless steel |
Spray banks | 7 pcs. |
Contact zones (wet film contact) | 1 pc. |
Absorber feed tank | 3.300 m3 |
Time schedule | |
Start of erection | 5/1993 |
Initial flue gas introduction | 3/1995 |
Final commissioning | 6/1996 |